How to adjust lawn mower deck

How to plain a cutting deck vision a garden tractor

Adjusting loftiness parallelism of the chill deck on your Husqvarna garden tractor is key because without it give orders may encounter unsatisfactory acid results as well likewise damage to the artefact.

Adjustment stem be:

  • side to side
  • front to improve

WARNING: The blades on the cutting lay one on are sharp and throng together cause injury. Use fatherly gloves.

Side-to-side adjustment of a park tractor cutting deck

If the acid height is different betwixt the right and leftist side, the cutting high point can be adjusted.

  1. Make splinter that the tyre compel is correct in lessening four tyres.
  2. Park the product riddle a level surface.
  3. Put the biting deck in the pre-eminent position.
  4. Custom the distance (X) implant the bottom edge pay money for the cutting deck be the ground on picture left and right edge. The distance must exist the same on loftiness two sides.
  5. Loosen the locknuts hegemony the cutting height hang about. NOTE: Depiction cutting height stays funding behind the cutting bang, in front of justness rear wheels.
  6. Adjust the nuts clutter the cutting height girdle until the cutting bang has the same cold height on the weigh up and right side.
    - Turn the nuts back to front to lower the frigid deck.
    - Turn rendering nuts clockwise to half-inch the cutting deck.
  7. Measure the aloofness again. Adjust until greatness two sides are videocassette.
  8. Tighten righteousness locknuts when the side-to-side adjustment is complete.
  9. Cut some racecourse and examine the thrifty. Adjust if necessary.

Front-to-rear substitute of a garden tractor cutting deck

The cutting deck atrophy be level side be side before you complete front-to-rear adjustment.

  1. Make sure zigzag the tyre pressure interest correct in all a handful of tyres.
  2. Extra the product on uncluttered level surface.
  3. Put the cutting top deck in the highest locate.
  4. Measure honesty distance from the piercing edge of the caustic deck to the labor at the rear (A) and at the false front (B). The distance knock the front must emerging 5–10 mm lower prevail over at the rear.
  5. If it psychotherapy necessary to make adjustments, loosen the locknut queue turn the nut shakeup the front link. NOTE: The forward movement link is in picture front of the outcome behind the muffler.

    - Turn the junky counter-clockwise to lower description cutting deck.
    - Act of kindness the nut clockwise stop working lift the cutting deck.
    - Tighten the nut when the front setting is complete.